TEC Models:

Servicing infrared gas grills for many years, I have seen one problem with the infrared gas burner over and over again. Moisture. If water gets into an infrared burner while it is not burning and the water gets into the housing it must be drained. Extract it from the grill and leave it upside down for a few hours. If the burner is lit while water is in the housing the ceramic tiles can crack. The water condensates from the intense heat and is forced from the stainless housing so fast a small crack will form n the tiles. While you are cooking, if the tiles shift from internal gas pressure the burner will go out.

Sometimes the flame will just die and sometimes it can make a 'whoosh' or 'pop' sound but either way it ts telling you to replace your infrared burner.

Infrared burners on right side of these images is the original TEC burner. The infrared burner on the left side is the infrared replacement burner installed.

TEC Sterling Burner at 16 Years:

TEC Infrared Burner
Patio II & Sterling II

Infrared Burner, stainless steel with ceramic plate (requires 2 each for Patio II and Sterling II; 3 each for Sterling III). Includes mesh.
Check TEC Infrared Burner Size and manufacturing information for this model.

TEC Infrared Burner Screen Only

TEC Cooking Grates

V-Channel Grilling Grate, 14.75' w x 12.75' deep, stainless steel (requires 2 each for Patio II and Sterling II; 3 each for Sterling III).

TEC Sterling II Pilot Assembly

More Pilot Kits Below

TEC ignition pilot kit assembly for TEC Sterling II is the replacement grill parts used as the ignition on the original infrared gas grills.

TEC Infrared Burner

Infrared replacement burner for TEC grill repair. TEC grill repair for Patio 2 and Sterling 2 and Sterling 3 infrared gas grill burner by Rasmussen. High quality materials and modern manufacturing.

TEC Cooking Grate

TEC replacement cooking grate for TEC Patio 2, Sterling 2 and Sterling 3 is 14.75 x 12.75 inches.

V grate design continues the TEC concave grid design to add flavor while grilling but using the V grid is much easier to clean and maintain the grilling grate.
Why and what is a V-Grate?
Scraper Details

TEC Grilling Grid

TEC replacement cooking grate for TEC Patio II, Sterling II and Sterling III.
14.75 x 12.75 inches.

This is the original U channel concave grid manufactured by TEC. The Patio 2 and the Sterling 2 have Two Grates and the Sterling 3 grates. Twelve rows each individual stainless channel with small holes in the front for drippings.

Stainless steel U channel cooking grates for the TEC Sterling 28 and Patio I infrared gas grill models. These TWO cooking grates are the original grids that fit the original infrared models. The Sterling 28 and the Patio I had 2 controls but one large infrared burner whereas newer TEC models had 2 or 3 infrared burners.
Dimensions 14 5/8 x 11 5/8 inches.

Tec stainless steel cooking grates for G model infrared grills. These newly designed grates for the G models are 18.25 Inches deep and slightly wider than 10 Inches.

Replacement stainless steel mesh screen for TEC infrared gas grill burners in Sterling 2 and 3 and Patio 2 models.

TEC Pilot Kit

The older TEC infrared gas BBQ grillsused a pilot to ignite the infrared burners. The igniter module wires to the electrode to ignite the pilot which lights the infrared burner. This TEC replacement pilot ignition kit attaches to the manifold to replace the original pilot.

TEC Double Igniter Pilot

TEC double pilot replacement kit for TEC infrared gas grill repair. Back when TEC had the pilot kits there was a kit that fit the Sterling 2 grill models that had two infrared burners and a pilot kit to fit the TEC Sterling 3 with three infrared burners. This Pilot kit is designed with 2 pilot kits already installed with the aluminum gas line and igniter wires for the 3 burner TEC Sterling 3 models.

82357

TEC infrared gas grill electrode

Infrared gas grill electrode for older infrared gas grills and newer infrared gas grills. The two posts allow the igniter to arc between the two points and ignite gas emitting from the infrared gas grill burner.

82358

TEC new gas grill electrode

New TEC gas grills use a rectangular stainless steel burner with has angled shields that magnify heat for infrared temperatures without the original pressurized ceramic tile burners. This electrode spark arcs against the stainless steel material of the burner.

82359

TEC infrared gas grill control valve

This is a replacement control valve for TEC Patio II, Sterling II and Sterling III control valves. Some of the TEC infrared gas grill models had clamps instead of this bolt design so check your valve before ordering.

TEC Control Valve.

TEC - Thermal Engineering Corporation - BBQ grill repair control valve. The control valve screws right into the manifold. Use a sealant when attaching the control valve to the manifold. The hood style orifice attaches to thecontrol valve; use your existing orifice for either natural gas or liquid propane.

Replacement control valve for TEC infrared Cherokee grill models. The gas Cherokee was a single infrared burner grill designed to be able to be used with a rolling cart or as a portable table top infrared grill. The control valve has a male 3/8 inch flared threading to attch to a direct gas line. The tip is 1/8 threaded so the original orifice can be put onto the new valve when it is installed.

TEC replacement hood style orifice with #72 starter hole and 1/8-27 threading.
Generally, the only reason to change an orifice is because the gas type is changing. Let us know the gas type and which burner the orifice will fit. Although all the orifices are the same each burner requires a different BTU setting.

Replacement rotary spark generator ignition module for TEC barbecue grill repair. Two screws hold the rotary module on the control panel. Electrode wire connects to the rotary module ignition from nside the control panel.

Replacement rotary ignition module with 2 outlets to connect two electrodes.

Replacement infrared burner for TEC G-Series model gas grills. The infrared replacement burner for the G Series is 20 3/8 Inches long and 9 1/2 inches wide.

TEC replacement burner for Sterling II and III and Patio II model infrared grills. TEC burner from Thermal Engineering Corporation has the bottom bracket which is removable.
Compare Infrared Burners

TEC Patio I infrared burner replacement

The original TEC Patio I infrared burner with two venturi tubes. TEC stopped making this replacement burner for the original infrared Patio gas grills. They are available for a limited time until stock is depleted.

TEC Sterling I infrared replacement burner

The original TEC Sterling I infrared burner with two venturi tubes that attach to TEC grill valves at the front of the infrared grill. TEC stopped making this replacement burner for the original infrared gas grills. They are available for a limited time until stock is depleted.

Replacement Wire Mesh Screen for TEC Infrared Sterling 28 double burner.

Wire Mesh Screens cover all infrared burners in order to provide some protection to the ceramic top by spreading the weight of anything dropping onto the burner.

Black plastic replacement control knob for TEC infrared gas grills

Black plastic replacement control knob for TEC infrared gas grills

Stainless steel replacement control knob for TEC infrared gas grills. This knob is solid stainless steel -- TEC knob details -- all the way through! While most knobs are plastic and colored to seem stainless and even stainless knobs are 1/8 inch thick but hollow inside the Thermal Engineering control knob is totally solid.

Replacement warming rack for TEC Sterling three infrared gas grill. The Sterling 3 was the TEC model with 3 infrared burners. This model was available on a moving cart or as a built-in barbecue and the head was about forty-one inches wide.

Tec BBQ Grill Cover. Heavy vinyl padded weather cover for built in Sterling II infrared gas grill models by TEC, Thermal Engineering Corporation.

Tec BBQ Grill Cover. Heavy vinyl padded weather cover for infrared Patio II gas grill models by TEC. Thermal Engineering Corporation full-length cover for Patio II on a cart with One side shelf.

TEC Heavy duty Patio 2 model gas grill cover. Full length cover for a Patio 2 infrared gas grill with Two side shelves.

The original Patio Two drip pan by TEC was not fabricated of stainless steel. This new replacement TEC drip pan is manufactured by Thermal Engineering Corp using American made 304 stainless steel.

Liquid propane regulator and twenty-four inch gas hose with 3/8 inch female flared attachment.

Two Stage Propane Regulator with 24 Inch gas hose. Gas hose connection is 3/8 flared female. Two foot long rubber gas hose. Two stage regulators are used in gas barbecues with higher BTU flow than most -- as much as double the gas flow. These are usually found on larger sized infrared grills and should be used on any low pressure LP appliance pulling more than 65,000 BTU from a residential portable LP tank.

Glass panel for TEC G model infrared gas grills. 16 inches by 9 inches black glass panel is flat and smooth on one side and textured on the other side. After the production of the Sterling 2 and 3 the G series and the stainless burner models have been using glass panels as heat diffuser and as vaporization shields with the changed design of the convex grilling grates.
More About TEC Infrared Glass.

Glass panel for TEC G Sport model infrared gas grills. 22 By 11 inches black glass panel is flat and smooth on one side and textured on the other side.

Replacement tile for the Sterling 2, Sterling 3 and Patio 2 infrared burners. This kit comes as shown with the tiles, stainless frame and gaskets used to replace the tile top of TEC infrared grill burners.

Cost includes very delicate shipping.

Installation must be performed by professionals; very carefully to set perfect seal.

Gaskets only for TEC tile burner repairs. This kit includes the Two 11.25 inch strips and Two gasket strips 7.5 inches.

Strainless steel infrared burner brasckets for the TEC Sterling 2, Sterling 3 and Patio 2 burners. The ceramic tile in the infrared burners by Thermal Engineering Corporation have two stainless brackets to hold the ceramic tile in place on each burner.
This item number contains both brackets.